Jaime’s project is interesting because it treats the brewery as a connected process: heating, recirculating, transferring, cooling and cleaning share a deliberately routed system. The archived description also makes clear that the design was evolving.
A mobile all-electric RIMS system
The author described an all-electric brewery on a mobile frame, using a recirculating infusion mash system (RIMS). Pumps, valves and liquid paths served heating, transfers and the boil, with routing also used for wort cooling.
The text describes arrangements for forward and reverse flushing. It presents an evolving personal build rather than a finished standardised product. Its controller description is on/off; PID control appears as something the author might try, not a confirmed installed feature.
These are reported design features. They do not establish independent efficiency, electrical compliance, validated cleanability or present-day performance.
Section references: Jaime M — archived Franklinbrew project, 9 April 2015.
A temperature target is only one part of a flow system
In a recirculating mash arrangement, liquid travels through a defined path and returns to the mash. The design question is therefore not just heater output: the intended flow, measurement point and response to lost flow all matter.
When reading a historical diagram, ask where the sensor observes the liquid and what the controlled output actually changes. A stable display at one location would not by itself prove uniform conditions everywhere in a mash.
The archive does not supply a current, independently checked operating envelope for recreating the brewery. Do not convert a descriptive account into a wiring or heater-selection instruction.
Draw a route for every operating mode
The useful planning lesson is to draw separate paths for recirculation, transfer, cooling and cleaning. For each mode, identify the source, destination and the components the liquid passes through.
Then ask what changes between modes. Which valves move? What remains full? Where can liquid be trapped? A compact shared route can reduce visible hose changes while making the operating state less obvious.
In a modern review, each proposed mode needs a clear and verified valve state and a suitable response to blocked flow or an empty vessel. Those are design requirements to establish, not features we infer simply because the old brewery had pumps and valves.
Backflushing is a capability, not a cleaning validation
The archived provision for forward and reverse flushing is worth noting. It shows that cleaning access was considered in the layout. It does not establish which chemical process reached every wetted surface.
For a new system, identify drainability, parts requiring disassembly and any paths that an approved cleaning method cannot reach. Verify compatibility with the chemical, temperature and circulation conditions actually used.
A practical design review should be able to trace the cleaning path as clearly as the wort path. Do not declare a system clean solely because it can circulate liquid.
Missing specifications are part of the record
A modern build would still need
- Verified vessel capacities, heater and electrical-load specifications.
- Applicable electrical protection and qualified installation design.
- Flow, level and dry-fire safeguards appropriate to the system.
- Pump, valve, material and seal compatibility.
- Documented drainability and cleaning verification.
- Transport, support and site-specific operating provisions.
We have not confirmed those requirements for the historical brewery. No photographs or schematics are reproduced here because archival availability alone does not establish republication rights.
Consult the archived project description for its original context. Wayback availability can vary; this summary was checked against the primary text already recovered locally.
Sources & scope
References and review
Only the locally recovered primary description is used to confirm historical features. Contemporary discussion is framed as design-review questions, not a new engineered specification. No affiliation with the former club or project author is implied.
Franklinbrew · Independently written reference · Version 1.0 · Reviewed 17 November 2026.