Franklinbrew

Draft systems & serving

Serving Cask Ale at Home

Plan for living condition, gentle service and a container you can finish.

Cask service differs from pressure-keg dispensing: temperature, settling, venting and stock size all matter.

Reviewed 17 November 2026 · Version 1.0

Cask ale is a different service method, not simply a keg with the regulator turned down. Beer condition, sediment and air entering during dispense change the way you plan and use the container.

Start with the container and the occasion

Decide whether you are serving a brewery-filled cask, conditioning homebrew in a suitable cask, or aiming for cask-like presentation from a pressure-rated keg. Those routes need different equipment and handling.

Traditional service uses a supported cask and either gravity dispense or a beer engine. A pressure keg fitted for low-pressure service remains a pressure-keg system; do not assume cask fittings or venting instructions apply to it.

For an event, choose the volume around realistic consumption, not just the smallest available price per litre. Include time and a stable place for the beer to settle before service.

Cellar temperature is a deliberate condition

Cask Marque gives 11–13°C as its normal storage and serving guidance. This is a source-specific target for cask service, not a promise that every beer must use one exact temperature. Confirm the brewer’s preference.

Support the cask securely in its intended serving position and minimise disturbance after settling. A beer containing sediment cannot be handled like a filtered keg without considering what the movement will put back into suspension.

Measure beer temperature, especially at the point of dispense. A cool room does not establish the temperature of a beer line exposed to warmer air. Avoid adding an unplanned warm route between storage and glass.

Section references: Cask Marque — Let’s Get Real: Cellar Card.

Venting controls condition and depends on the system

Traditional cask practice uses venting arrangements appropriate to the cask and the state of its conditioning. The brewer or cask supplier should establish the sequence for receipt, settling, venting, tapping and service.

Do not turn that sequence into a generic instruction to open any pressurised container. Keep your pressure-keg regulator calculations separate. Our carbonation calculator assumes pure-CO₂ equilibrium over beer; it is not a cask-cellaring schedule or a priming-sugar calculator.

An aspirator or cask breather is a purpose-designed system with its own operation and fittings. It should not be improvised by connecting an ordinary regulator to a traditional cask and guessing a pressure.

Section references: Cask Marque — Let’s Get Real: Cellar Card.

Air exposure makes turnover part of the plan

Traditional dispense admits air as beer leaves the cask. That changes the storage situation after opening and makes an indefinitely long service window unrealistic. Cask Marque’s cellar card advises container sizes that can be emptied within three days on sale; treat that as operating guidance, not a shelf-life guarantee for every beer.

Write down the start of service and assess quality at each session. Follow the brewery’s best-before and handling instructions. Never return dispensed beer to the cask.

For a small household, a smaller suitable container or a separately planned keg approach may fit consumption better than a full pub-sized cask. Choose the method deliberately instead of planning to keep a traditional opened cask for weeks.

Section references: Cask Marque — Let’s Get Real: Cellar Card.

Include the tap, engine and line

A clean cask does not establish that the dispensing path is clean. Account for serviceable taps, filters, lines and beer-engine parts, and follow their specific cleaning and maintenance directions.

Cask Marque’s cellar card calls for line cleaning at least every seven days. This is a cask-specific reference and differs from the BA minimum 14-day draught-line recommendation discussed in our general cleaning guide. Use the process and frequency appropriate to the actual service system and beer.

If cleaning status, cask condition or equipment suitability is unresolved, record that gap before the event. There is no benefit in making the first public pour the first time the equipment has been checked.

Section references: Cask Marque — Let’s Get Real: Cellar Card.

Sources & scope

References and review

This independently written introduction continues the subject of the former cask page. It does not reconstruct that page or reproduce its material. Cask Marque targets are attributed and kept distinct from ordinary keg-calculator assumptions.

  1. Cask Marque — Let’s Get Real: Cellar Card
  2. Cask Marque — Charter and training resources

Franklinbrew · Independently written reference · Version 1.0 · Reviewed 17 November 2026.